Poul Ladegaard's Air Bearing Tangential Tonearm!
Translation of descriptive notes:
- Aluminum angle 3 x 20 x 20 mm with air holes.
- Araldite (epoxy) glue (silicone can be used successfully)
- 3 mm aluminum angle, cut accordingly. (Or a U-profile of proper size.)
- 6 x 30 mm cross section aluminum block.
- Support block of black painted wood.
- Air input tube
- Tape with 0.3 mm holes.
The armbase is 30 cm long and each end is closed with a thin piece of aluminum
sheet (1 mm) filed to the right shape.
Administrivia: